GameSir X2 Pro — Button mapping
Quick answer
Button combo
View+Menu+M1/M2(3s)press target button
Steps
- 1Hold View + Menu + the back button (M1 or M2) for about 3 seconds.
- 2When LED 1 and LED 2 flash together, tap the button you want that paddle to copy.
- 3LED 1 and LED 2 flash twice and go out to confirm the mapping is saved.
- 4Map paddles to A/B/X/Y/L1/R1/LT/RT on the controller; no app needed.
- 5To map to L3/R3 or the D-pad, use the GameSir app's firmware feature over USB-C.
Last verified: 2026-06-20Source: gamesir.com
The X2 Pro's two rear paddles are mapped right on the controller. Hold View + Menu + M1 (or M2) for three seconds until both indicator LEDs flash, then press the button you want the paddle to mimic; a double flash confirms it. Face, shoulder and trigger buttons can be assigned without software, while L3/R3 and D-pad assignments use the GameSir app over USB-C.
FAQ
- Which buttons can a paddle copy?
- On-board you can map A/B/X/Y/L1/R1/LT/RT. L3/R3 and D-pad require the GameSir app.
- How do I clear a paddle?
- Re-run the mapping and assign it again, or reset assignments through the GameSir app.