RetroCompass
RetroCompass

GameSir T4 Kaleid — Mode switch

Quick answer

Button combo

Y+HOME Switch·X+HOME PC/XInput·A+HOME Android·B+HOME DInput

Steps

  1. 1Connect the T4 Kaleid over USB-C to your device.
  2. 2Switch mode: hold Y + HOME for 2 seconds (LED strips flash red twice).
  3. 3PC / XInput: hold X + HOME for 2 seconds (flash green twice).
  4. 4Android: hold A + HOME for 2 seconds (flash blue twice); DInput: hold B + HOME (flash purple twice).
  5. 5Wait for the matching flash, then the controller runs in that mode.

LED states

  • flash twice—Switch mode
  • flash twice—PC / XInput mode
  • flash twice—Android mode
Last verified: 2026-06-20Source: gamesir.com

The T4 Kaleid changes platform with a HOME button combo, not a physical slider. Hold Y + HOME for Switch, X + HOME for PC (XInput), A + HOME for Android, and B + HOME for DInput, each for about 2 seconds. The LED strips confirm with a double flash: red for Switch, green for PC, blue for Android, purple for DInput. For Switch, first enable Pro Controller Wired Connection in the console settings.

FAQ

Which mode for Steam or most PC games?
Use X + HOME for PC/XInput; the strips flash green twice when it is active.
It will not work on my Switch.
Set Y + HOME for Switch mode and enable Pro Controller Wired Connection in System Settings first.

Same device — other tasks

Other devices — same task