RetroCompass
RetroCompass

GuliKit Elves — Pairing

Quick answer

Button combo

Mode(hold ~2s to pick mode)Pairing(hold 2s)

Steps

  1. 1Single-click the Mode button to power the controller on.
  2. 2Hold the Mode button ~2s to select the mode you need (Switch · PC X-INPUT · PC D-INPUT · iOS · Android).
  3. 3Hold the Pairing button 2 seconds; the indicator flashes quickly to show pairing mode.
  4. 4On Switch, connect to the dock with the USB-A-to-USB-C cable for the first link, then unplug to go wireless. On PC/phone open Bluetooth settings.
  5. 5Select "GuliKit Controller" (PC) or "Xbox Wireless Controller" (Android/iOS/macOS); the flashing stops once connected.

LED states

  • fast flashing—Pairing mode active, searching for a host
  • solid—Connected to a host
Last verified: 2026-06-20Source: gulikit.com

Power on with a single click of the Mode button, choose the right mode by holding Mode ~2s, then hold the Pairing button 2 seconds until the indicator flashes quickly. On Switch the easiest first link is over the dock with the USB-A-to-USB-C cable; afterward you can unplug for wireless. On Windows pick "GuliKit Controller"; on Android, iOS and macOS pick "Xbox Wireless Controller".

FAQ

Do I have to pick a mode before pairing?
Yes. Hold Mode ~2s to select Switch, PC X-INPUT, PC D-INPUT, iOS or Android first, then hold Pairing for 2 seconds.
The Switch isn't finding the controller.
Open the Switch "Change Grip/Order" screen, then hold Pairing for 2 seconds, or link first by cable through the dock.

Same device — other tasks

Other devices — same task