RetroCompass
RetroCompass

GuliKit KingKong 3 Max — Pairing

Quick answer

Button combo

Mode(double-click to pick platform)Pairing(hold 2s)

Steps

  1. 1Short-press the Mode button (or A/B/X/Y/HOME) to power the controller on.
  2. 2Double-click the Mode button to select the target platform (Switch · PC · Mobile) before pairing.
  3. 3Hold the dedicated Pairing button for 2 seconds; the indicator light starts scrolling.
  4. 4On Switch, connect the USB-C cable to the dock for the first link, or open Change Grip/Order; on PC/phone open Bluetooth.
  5. 5Select "GuliKit Controller" (PC) or "Xbox Wireless Controller" (phone in Mobile mode); scrolling stops when paired.

LED states

  • scrolling—Pairing mode active, searching for a host
  • solid (assigned slot lit)—Connected; the lit LED shows the player slot
Last verified: 2026-06-20Source: gulikit.com

The KingKong 3 Max (NS39) separates platform selection from pairing. Power on with a short Mode press (or any face/HOME button), double-click Mode to pick Switch, PC or Mobile, then hold the Pairing button for 2 seconds until the indicator scrolls. On Switch the simplest first link is the USB-C cable into the dock, after which it stays wireless; PC pairs over Bluetooth as "GuliKit Controller" and phones list it as "Xbox Wireless Controller" in Mobile mode. For pure wired use, just plug in the USB-C cable.

FAQ

Which button starts pairing — Mode or Pairing?
The dedicated Pairing button starts pairing (hold 2s). Mode only powers on/off and changes the platform (double-click).
Do I pick the platform before pairing?
Yes. Double-click Mode to the matching platform first, otherwise the controller may be discovered in the wrong protocol.

Same device — other tasks

Other devices — same task