RetroCompass
RetroCompass

GuliKit KingKong Pro — Pairing

Quick answer

Button combo

Mode(hold 2s, set mode)pairing button(hold 2s)

Steps

  1. 1Press the Mode button once to power the GuliKit KingKong Pro on.
  2. 2Hold the Mode button ~2s to select the matching mode (Switch · PC X-input · PC D-input · Android).
  3. 3Hold the pairing button ~2s; the LED scrolls to show pairing mode.
  4. 4On Switch open Controllers › Change Grip/Order; on PC/Android open Bluetooth settings.
  5. 5Pick the controller (it shows as "GuliKit Controller" on PC/Android); the scrolling LED stops once paired.

LED states

  • scrolling—Pairing mode active, searching for a host
  • solid (one slot lit)—Connected; the lit LED shows the player slot
Last verified: 2026-06-20Source: fcc.report

The original KingKong Pro uses two separate buttons next to the USB-C port: Mode and pairing. Set the mode that matches your device first by holding Mode ~2 seconds, then hold the pairing button ~2 seconds to broadcast. On Switch, pair from the Change Grip/Order screen; on Windows and Android, pair from the system Bluetooth menu where the pad appears as "GuliKit Controller". For a wired connection just plug in the USB-C cable.

FAQ

Which button starts pairing?
The pairing button (hold ~2s). The Mode button only powers the pad on/off and changes the platform mode.
Does it work on Switch Lite?
Yes, but Switch Lite has no kickstand dock; pair it the same way from Controllers › Change Grip/Order.

Same device — other tasks

Other devices — same task