RetroCompass
RetroCompass

Flydigi Apex 3 — Reset

Quick answer

Button combo

SELECT+START+HOME(hold 5s)

Steps

  1. 1Power the controller on.
  2. 2Press and hold SELECT + START + HOME together for about 5 seconds.
  3. 3Release when the controller restarts; it returns to factory defaults.
  4. 4Re-pair afterwards and reapply any app settings.

LED states

  • blinking—Restarted in pairing mode
Last verified: 2026-06-20Source: en.flydigi.com

A factory reset clears stored pairings and settings. Hold SELECT + START + HOME for about 5 seconds until the controller restarts. After resetting you will need to pair again and reconfigure profiles in Flydigi Game Center or Flydigi Space Station.

FAQ

When should I reset?
Reset if inputs misbehave, a profile is stuck, or the controller won't connect after normal troubleshooting.
Does reset erase custom profiles?
Yes — on-board configurations and tuning return to defaults, so re-save your profiles afterward.

Same device — other tasks

Other devices — same task