RetroCompass
RetroCompass

GuliKit KingKong 2 Pro — Reset

Quick answer

Button combo

Pinhole reset(back of pad)·settings clear confirmed by long vibration

Steps

  1. 1If the pad is unresponsive, press the recessed reset hole on the back with a pin/toothpick for a hardware reset.
  2. 2For a settings/factory clear, follow the printed quick-start: the controller gives one long vibration to confirm the clear.
  3. 3The clear takes effect after the controller powers off; turn it back on afterwards.
  4. 4Re-select your working mode (hold Mode ~2s) since pairings/settings are wiped.
  5. 5Re-pair with the host (Pairing button, hold 2s).

LED states

  • off—Controller powered off after the clear; power on to re-pair
Last verified: 2026-06-20Source: gulikit.com

The KingKong 2 Pro has a recessed pinhole reset on the back for a hard reset when it stops responding. Separately, a settings/factory clear is confirmed by a single long vibration and only completes once the controller powers off, after which pairings and custom settings are wiped. Because the exact button sequence for the settings clear is not consistently documented across English manuals, verify the combo on the printed quick-start card before relying on it. After any reset, reselect the working mode (hold Mode ~2s) and re-pair.

FAQ

Where is the reset hole?
On the back of the controller — a small recessed pinhole. Press it with a pin or toothpick for a hardware reset.
Does reset delete my Auto Pilot Gaming macros?
A factory/settings clear wipes saved configuration. Back up the Auto.apg file from the "GuliKit dat" drive first if you want to keep macros.

Same device — other tasks

Other devices — same task