RetroCompass
RetroCompass

Flydigi Vader 3 Pro — Reset

Quick answer

Button combo

HOME(hold)+power on

Steps

  1. 1Turn the controller off (slide the rear switch back / let it sleep).
  2. 2Hold the HOME (logo) button and power the controller on at the same time.
  3. 3Keep holding until the logo light flashes — this confirms the reset.
  4. 4Release, then re-pair from the rear-switch mode you want.

LED states

  • logo flashes—Reset complete; pairing cleared
Last verified: 2026-06-20Source: shops.flydigi.com

To clear the Vader 3 Pro's stored pairing, power it off, then hold the HOME (logo) button while powering it back on until the logo light flashes — that signals the reset is done. Re-pair afterward using the rear mode switch. There is no separate factory wipe; button macros and profiles are managed in Flydigi Space Station.

FAQ

Does reset erase my macros?
No — this only clears wireless pairing. Macros and profiles live in Flydigi Space Station / on the controller and are managed there.
When should I reset?
When the controller won't connect, keeps slow-flashing, or is stuck paired to an old device.

Same device — other tasks

Other devices — same task