RetroCompass
RetroCompass

RG34XX — Reset

Quick answer

Button combo

SettingsSystemReset·(or re-flash TF1)(or re-flash TF1)

Steps

  1. 1In the stock Anbernic OS, open Settings and look for a reset / restore option.
  2. 2For a full reset, re-flash the official .img to the TF1 (OS) card with balenaEtcher.
  3. 3Back up the TF2 (ROM) card to a computer before any full reset.
  4. 4Reinsert TF1 and TF2 and press POWER to boot into first-time setup.
  5. 5If it hangs, press the small reset pinhole, then power on.
Last verified: 2026-06-20Source: anbernic.com

On the RG34XX a soft reset of settings is available inside the stock Anbernic OS, while a true factory reset means writing the official firmware .img back to the TF1 (OS) microSD with balenaEtcher, replacing the whole system partition. Your ROMs and saves live on the separate TF2 card, so back it up first; re-imaging TF1 does not erase it. A recessed pinhole reset handles a frozen unit. This is a DRAFT for human review.

FAQ

Will a reset delete my games?
Re-imaging the TF1 (OS) card does not touch the TF2 (ROM) card, so games and saves remain. Back up TF2 first to be safe.
Is there a reset button?
Yes, a small recessed pinhole reset; press it with a pin if the device freezes, then power on again.

Same device — other tasks

Other devices — same task