RetroCompass
RetroCompass

TrimUI Brick Pro — Reset

Quick answer

Button combo

(hold VOL−)(hold VOL−)+POWER(expected)

Steps

  1. 1Back up your Saves, Roms and BIOS folders from the microSD card first.
  2. 2Download the official Brick Pro SD base package once TrimUI publishes one.
  3. 3FAT32-format the card and extract the package to its root with 7-Zip.
  4. 4Re-insert the card and re-flash with VOL− + POWER (expected TrimUI flow).
  5. 5On any supported CFW, prefer its built-in factory-reset option instead.
Last verified: 2026-06-20Source: github.com

As a new 2025 Linux handheld, the Brick Pro is expected to follow TrimUI's usual model: system and games live on the microSD card, and a clean reset means re-writing the card with an official SD base package, extracted with 7-Zip, and re-flashing the firmware. There is typically no in-menu factory reset on stock TrimUI OS. Because the device is still launching, confirm the exact reset/base-package procedure on TrimUI's official channels, and remember a factory reset usually clears saved Wi-Fi passwords.

FAQ

Is there an in-menu factory reset?
TrimUI's stock Linux OS is normally reset by re-flashing the SD base package rather than a menu option. Check the Brick Pro's official guide once published to confirm.
Will a reset delete my saves?
Re-writing the card replaces its contents, so copy your Saves (and Roms/BIOS) to a PC first. This is standard for TrimUI's SD-card-based devices.

Same device — other tasks

Other devices — same task