RetroCompass
RetroCompass

Flydigi Vader 3 — Reset

Quick answer

Button combo

SELECT+START+HOME(hold)

Steps

  1. 1Power on the controller with a HOME press.
  2. 2Press and hold SELECT + START + HOME together.
  3. 3Keep holding until the RGB light dims and then turns back on.
  4. 4Release; the saved pairing is cleared and the pad restarts.
  5. 5Re-pair from scratch using the pairing or Bluetooth steps.

LED states

  • dims then relights—Reset taking effect
  • fast blink—Ready to pair again
Last verified: 2026-06-20Source: en.flydigi.com

If the Vader 3 will not connect or behaves oddly, a reset clears its stored pairing. With the pad on, hold SELECT + START + HOME together until the RGB light dims and lights up again, then let go. This wipes the remembered devices, so you will need to pair again from scratch. If a wired connection still fails, charge it 5–10 minutes and check the USB-C cable first.

FAQ

Will a reset delete my macros and settings?
It clears pairing and reboots the pad; your stored profiles live in Flydigi Space, so reconnect there to restore them.
Nothing happens when I press the combo.
Make sure the pad is powered on first, then hold all three of SELECT + START + HOME until the light dims.

Same device — other tasks

Other devices — same task