RetroCompass
RetroCompass

Flydigi Vader 4 Pro — Reset

Quick answer

Button combo

HOME(hold 3s)·Flydigi Space(full reset)

Steps

  1. 1For connection issues, hold HOME 3s until the LED blinks fast to re-enter pairing.
  2. 2On the host, remove the old Xbox Wireless Controller entry, then re-pair.
  3. 3For a 2.4G link, unplug and reinsert the USB-C dongle, then press HOME.
  4. 4To wipe macros/profiles, connect via USB-C and use Flydigi Space to restore defaults.
  5. 5If unresponsive, drain or charge the battery, then power-cycle with the rear switch.

LED states

  • Fast blink—Re-pairing after reset
  • Off—Powered down / rear switch off
Last verified: 2026-06-20Source: shops.flydigi.com

There is no single hardware factory-reset combo on the Vader 4 Pro. For connection problems, hold HOME 3 seconds to re-enter pairing and remove the stale Xbox Wireless Controller entry on the host. To erase custom mappings, macros, and profiles, connect over USB-C and restore defaults in the Flydigi Space app. A rear-switch power-cycle clears most transient glitches.

FAQ

Is there a hardware factory reset?
No public hardware-only factory reset exists; profile/macro resets are done in Flydigi Space over USB-C.
Controller is frozen — what now?
Toggle the rear switch off and on to power-cycle; if needed, connect USB-C to charge and wake it.

Same device — other tasks

Other devices — same task