RetroCompass
RetroCompass

Flydigi Vader 3 — Firmware update

Quick answer

Steps

  1. 1On PC, install Flydigi Space; on a phone, install Flydigi Game Center.
  2. 2Connect the Vader 3 by USB-C cable, or by the 2.4G dongle on PC.
  3. 3Open the app and wait for the controller to be detected.
  4. 4If an update is offered, start it (One-click upgrade) and follow the prompts.
  5. 5Do not disconnect or power off until it finishes.

LED states

  • solid—Connected to the app
  • slow blink—Update in progress
Last verified: 2026-06-20Source: en.flydigi.com

Firmware for the Vader 3 is updated through Flydigi Space on a PC or Flydigi Game Center on a phone. Connect the pad with a USB-C cable (or the 2.4G dongle on PC), open the app, and let it detect the controller. If an update is available, run the One-click upgrade and keep the pad connected the whole time. A wired USB-C connection is the most reliable way to flash.

FAQ

PC or phone for the update?
Either works: Flydigi Space on PC or Flydigi Game Center on mobile. A wired USB-C link is the most reliable.
The update stalled — what now?
Do not power off; reconnect the USB-C cable, reopen the app, and let it resume or retry the upgrade.

Same device — other tasks

Other devices — same task