RetroCompass
RetroCompass

AYANEO 2 — Firmware update

Quick answer

Button combo

AYASpaceSettingscheck for update·ayaneo.comSupport & DownloadsBIOS

Steps

  1. 1Connect to Wi-Fi, plug in the charger, and back up your files first.
  2. 2Open AYASpace and check the update section; install any AYASpace, driver, and controller firmware updates it offers.
  3. 3For a BIOS update, download the latest "AYANEO 2 BIOS & Audio Driver" from ayaneo.com Support & Downloads and unzip it to a path with no spaces or non-English characters (e.g. C:\update).
  4. 4Right-click 01-start.bat (or InstallPackage.bat) and choose Run as administrator; the device flashes the BIOS and shuts down on its own.
  5. 5Wait 3-10 minutes, then press Power to boot (first boot is slow); if there is no sound, install the bundled audio driver.
Last verified: 2026-06-20Source: ayaneo.com

The AYANEO 2 is a Windows 11 handheld, so updates come in two layers: AYASpace (AYANEO's official control app) handles driver and controller-firmware updates, while BIOS updates are downloaded from the official AYANEO website and flashed by running 01-start.bat as administrator. Do not power off or unplug during a BIOS flash. After a BIOS update your VRAM/memory split may reset, so you can press F7 at the AYANEO logo to adjust BIOS settings if needed. Updating the BIOS carries some risk; proceed only if you need the fix or feature.

FAQ

Where do I get the BIOS file?
From the official AYANEO website under Support & Downloads, as the "AYANEO 2 BIOS & Audio Driver" package. Unzip it to a folder with no spaces or non-English characters before running 01-start.bat as administrator.
There is no sound after the BIOS update.
Some batches lose the audio device after a BIOS flash. Install the audio driver included in the same download package, then reboot.

Same device — other tasks

Other devices — same task