RetroCompass
RetroCompass

Retroid Pocket 2S — Firmware update

Quick answer

Button combo

SettingsSystemUpdater(System update)Check for update

Steps

  1. 1Connect the Pocket 2S to Wi-Fi and charge above 50%.
  2. 2Open Settings, go to System, then Updater (System update / FOTA).
  3. 3Tap Check for update to query Retroid's servers.
  4. 4Download the update, tap Install and confirm; the device reboots.
  5. 5Do not power off or remove the microSD during the flash.
Last verified: 2026-06-20Source: goretroid.com

The Pocket 2S runs Android 11 (Unisoc T610), so firmware arrives as official over-the-air (OTA) updates handled by the built-in Updater / FOTA tool under Settings > System. Keep Wi-Fi connected and the battery charged, check for an update, then download and install. Retroid has only shipped incremental Android 11 updates for the 2S, with no jump to Android 12/13, so expect bug fixes rather than new OS versions. If an OTA fails to apply, Retroid posts firmware images on its software pages for manual reflash via a PC.

FAQ

Where do I check for updates?
Settings > System > Updater (System update / FOTA), then tap Check for update. The 2S does not always auto-prompt, so check manually.
Will the Pocket 2S get Android 12 or 13?
No. Retroid has provided only incremental Android 11 updates for the 2S. Updates are bug fixes and tweaks, not a new Android version.

Same device — other tasks

Other devices — same task