RetroCompass
RetroCompass

Ayn Loki Zero — Firmware update

Quick answer

Button combo

Ayn official software pageLoki Zero downloads

Steps

  1. 1On the Loki Zero, open Settings and run Windows Update first.
  2. 2Download the Loki Zero BIOS file and Windows 11 driver package from Ayn's official software page.
  3. 3Connect the USB-C charger and keep the battery above 30% before flashing.
  4. 4Run the BIOS updater and driver package as administrator and follow the prompts.
  5. 5Reboot only when the updater reaches its final screen; the BIOS flash takes about 3–5 minutes.
Last verified: 2026-06-20Source: ayntec.com

The Loki Zero is a Windows 11 PC. Update it like a laptop: run Windows Update, then apply Ayn's official Loki Zero BIOS file and Windows 11 driver package. Make sure you pick the Loki Zero downloads, stay on AC power, and never power off during the flash.

FAQ

Which BIOS file do I choose?
Select the Loki Zero download on Ayn's official software page so it matches your exact model.
Can I reboot during the update?
No. Only reboot once the updater shows its final screen, after about 3–5 minutes.

Same device — other tasks

Other devices — same task