RetroCompass
RetroCompass

Ayn Loki Max — Firmware update

Quick answer

Button combo

Ayn official software pageLoki Max (6800u) downloads

Steps

  1. 1On the Loki Max, open Settings and run Windows Update to install the latest Windows patches.
  2. 2Visit Ayn's official software page and download the Loki Max (6800u) BIOS file and Windows 11 driver package.
  3. 3Plug in the USB-C charger and keep at least 30% battery before flashing the BIOS.
  4. 4Run the BIOS updater and the driver package as administrator, then follow the on-screen prompts.
  5. 5Reboot only after the updater reaches its final screen; the BIOS flash takes about 3–5 minutes.
Last verified: 2026-06-20Source: ayntec.com

The Loki Max is a Windows 11 PC, so firmware is updated like any laptop: install Windows Update, then apply Ayn's official BIOS file and Windows 11 driver package for the Loki Max (6800u). Keep the device on AC power and do not power off mid-flash.

FAQ

Where do I get the BIOS and drivers?
From Ayn's official software page only. Select the Loki Max (6800u) downloads to match your model.
How long does the BIOS update take?
About 3–5 minutes. Wait for the final screen before rebooting.

Same device — other tasks

Other devices — same task