RetroCompass
RetroCompass

Retroid Pocket 3+ — Firmware update

Quick answer

Button combo

SettingsSystemAdvancedUpdaterCheck Update

Steps

  1. 1Connect the Pocket 3+ to Wi-Fi and charge the battery above 50%.
  2. 2Open Settings, scroll to System, then tap Advanced.
  3. 3Tap Updater, then Check Update to look for an official OTA package.
  4. 4Tap YES to download and install; the update takes about 10 minutes and reboots.
  5. 5Do not power off or remove the microSD while it flashes.
Last verified: 2026-06-20Source: goretroid.com

The Retroid Pocket 3+ runs stock Android 11 on a Unisoc Tiger T618 and receives official OTA firmware through the built-in updater. On this model the updater lives under Settings > System > Advanced > Updater; tap Check Update over Wi-Fi, then YES to download and install. The flash takes roughly 10 minutes and the device restarts on its own. Retroid has shipped several OTA updates for the Pocket 3+ that are mostly bug fixes. Install only firmware Retroid distributes for the Pocket 3+ and confirm the new build number afterward in Settings > About.

FAQ

Where do I check for firmware updates?
Open Settings > System > Advanced > Updater and tap Check Update over Wi-Fi. The Pocket 3+ does not always auto-prompt, so check manually.
How long does the update take?
About 10 minutes. Keep the battery charged and do not power off during the flash. Tap YES when prompted to reboot and finish installing.

Same device — other tasks

Other devices — same task