RetroCompass
RetroCompass

GameSir Super Nova — Firmware update

Quick answer

Button combo

Force update: hold HOME+"+" while plugging in USB-C

Steps

  1. 1Install GameSir Connect (v1.6.11 or later) from the Microsoft Store, or download it from the GameSir software page.
  2. 2Connect the Super Nova to the PC by USB-C cable or the 2.4G receiver in XInput mode (slide the switch to 2.4G).
  3. 3Open GameSir Connect and click the update icon in the top-right corner to install the latest firmware.
  4. 4If the update will not start, open GameSir Connect first, then hold HOME + "+" while plugging in the USB-C cable to open the recovery update window.

LED states

  • Channel lights cycle—Updating / do not unplug
  • Solid channel light—Update finished, controller ready
Last verified: 2026-06-20Source: gamesir.com

Firmware for the Super Nova is updated with GameSir Connect on Windows, connected by USB-C or the 2.4G receiver in XInput mode. Keep the controller plugged in until the progress finishes. If automatic updates do not appear (a known Microsoft Store glitch), get the latest GameSir Connect directly from the GameSir software page.

FAQ

Can I update firmware from my phone?
No. The Super Nova updates through GameSir Connect on a Windows PC, not from a phone. Connect by USB-C or the 2.4G receiver in XInput mode.
The update is stuck or fails partway.
Open GameSir Connect with nothing connected, then hold HOME + "+" while plugging in the USB-C cable to force the recovery update window, and retry.

Same device — other tasks

Other devices — same task