RetroCompass
RetroCompass

Flydigi Direwolf 2 — Firmware update

Quick answer

Steps

  1. 1On PC, install and open Flydigi Space Station; on mobile, install Flydigi Game Center.
  2. 2Connect the Direwolf 2 by USB-C (PC) or pair it to the app (mobile).
  3. 3Open its device page; if an update is offered, start it and keep the controller connected.
  4. 4Wait for the success message, then re-pair if needed.

LED states

  • fast flash—Updating / busy
  • solid—Update finished, connected
Last verified: 2026-06-20Source: en.flydigi.com

Update the Direwolf 2 through Flydigi's software: Flydigi Space Station on PC or Flydigi Game Center on mobile. A wired USB-C link to the PC app is the most reliable. Connect the controller, open its page, and follow the prompts. Keep it powered and connected throughout; do not unplug mid-update.

FAQ

USB or wireless for updating?
Use a wired USB-C connection to Flydigi Space Station on PC for the most reliable firmware flash.
The controller isn't detected by the app.
Switch to XInput (FUNC + X), reconnect the USB-C cable or re-seat the dongle, and restart the app.

Same device — other tasks

Other devices — same task