RetroCompass
RetroCompass

Retroid Pocket 5 — Firmware update

Quick answer

Button combo

SettingsSystemRetroid Pocket FOTACheck version

Steps

  1. 1Connect the Retroid Pocket 5 to Wi-Fi and charge above 50%.
  2. 2Open Settings and go to System, then Retroid Pocket FOTA.
  3. 3Tap Check version to query for an OTA update.
  4. 4Download the update package, then tap Install and confirm.
  5. 5Let the device reboot; do not power off during the flash.
Last verified: 2026-06-20Source: goretroid.com

The Retroid Pocket 5 runs Android 13, so firmware arrives as official over-the-air (OTA) updates handled by the built-in Retroid Pocket FOTA tool under Settings > System. Keep the device on Wi-Fi and well charged, check the version, then download and install. Retroid also posts full firmware images and flashing notes on its software page if an OTA fails or the device needs to be reflashed manually.

FAQ

Where do I check for updates?
Settings > System > Retroid Pocket FOTA, then tap Check version. The Pocket 5 does not auto-prompt reliably, so check manually.
Can I flash firmware manually?
Yes. Retroid publishes firmware images and flashing instructions on goretroid.com/pages/software for recovery or manual reflash when OTA is unavailable.

Same device — other tasks

Other devices — same task